quality FS Split Single Cartridge Mechanical Seal Balanced For Pumps And Agitators factory

FS Split Single Cartridge Mechanical Seal Balanced For Pumps And Agitators

Name: FS Split Single Cartridge Mechanical Seal Balanced For Pumps And Agitators
Brand: Hangzhou Bestseal International Trade Co., Ltd.
SKU: Type FS
Availability: InStock

Basic Properties

Place of Origin: CHINA

Brand Name: BESTSEAL

Certification: ISO9001

Model Number: Type FS

Trading Properties

Minimum Order Quantity: 1pc

Payment Terms: T/T,Western Union,D/P,D/A,L/C

Supply Ability: 1000000/Month

Huhnseal Type FS Split Balanced Single Cartridge Mechanical Seal for Pumps and Agitators Cartridge Mechanical Seal FS Split balanced single cartridge seal It is ideal for installation in pumps and agitators where it is difficult to remove the shaft and it handles normal pressure, temperature and ...

Product Details

Highlight:

FS Split Cartridge Mechanical Seal

,

Single Cartridge Mechanical Seal

,

FFPM balanced mechanical seal

Rotating Face Product Side: SSiC, TC

Stationary Face Product Side: SSiC - Carbon, TC

Rotating Face Atmospheric Side: TC

Stationary Face Atmospheric Side: Carbon, SSiC

Elastomer: EPDM / FPM, FFPM

Springs: EN 1.4401

Metal Parts: EN 1.4436/1.4460, Titanium / EN 1.4462

Product Description

Huhnseal Type FS Split Balanced Single Cartridge Mechanical Seal for Pumps and Agitators

Cartridge Mechanical Seal

FS

Split balanced single cartridge seal

It is ideal for installation in pumps and agitators where it is difficult to remove the shaft and it handles normal pressure, temperature and speed. Because the seal is delivered in two halves which are mounted together with eight screws it is very easy to install. The seal is assembled outside the pump and then pushed along the shaft on to the pump cover and then the gland bolts are tightened. When the set screws are tightened the distance clips can be removed. Huhnseal FS is available in shaft dimensions between 40-200 mm.

Features

1 / 2 / 3

Rotating seal ring / Shaft sleever / Static O-ring
4/ 5 / 6 / 7

Stationary spring loaded seal ring / Flange / Secondary seal / Static O-ring for the shaft
8 / 9 / 10 / 11

Holes for screws / Hole for guide pin / Distance clip / Gasket for pump cover

The easiest installation of any split seal in the world

Simply attach the two halves over the shaft and mount to the pump like any other cartridge seal.

Only split seal in the world in which just two pieces are handled

No handling of lapped faces as both are secured safely in the cartridge halves. Faces can’t get cocked, chipped or scarred.

Only split seal where impeller can be adjusted without removing the seal

Simply reinstall setting clips, release set screws and adjust impeller position, then retighten set screws and remove the clips.

Only split seal that can be fully assembled and pressure tested at the factory

Sealing integrity is insured completely before being sent to the field. Ensuring each installation of the highest success rate.

No measurements, no shims, no special tools and no glue

Standard cartridge setting clips assures proper axial and radial alignment and makes installation even easier.

Performance Capabilities

Temperature	-20℃ to 200℃, dependent on the elastomer
Pressure	Up to 2.5MPA
Speed	Up to 15 m/s
End play/axial float allowance	±0.1mm
Brand	BESTSEAL
Packing	Individual packing ,1 pc in 1 small box is available as well
Application Areas	Mining & Slurry Pulp & Paper Chemical industry W&WW and Dewatering

BESTSEAL — Your Reliable Partner for Mechanical Seals

BESTSEAL Advantage:
15 years	Focused in mechanical seal manufacturing
3 hours	Quotation response only takes 3 hours
1 day	Provide production assembly drawings
1 piece	MOQ, One piece can also be produced
15-20 working days	The production cycle only takes 15-20 working days
real-time	Real time synchronization of production progress